5 Safety Tips for DIY Roof Reparations

Let’s be honest, nobody likes doing roof work. One simple mistake and your efforts to save time and hassle could literally land you in the emergency Room.Whether you need to clean the gutters, check for storm damage or plan on replacing shingles, here are five safety tips for DIY roof reparations.

Roof-ShinglesRoyalty Free Photo

Work When It Is Safe

Work when it is safe to do so. It is dangerous to work on a wet roof, and the risk only goes up if you’re working when precipitation is still falling. Never work on the roof when there is lightning or high winds. If there is a critter on the roof or in the attic, have it removed before people start working around it. Block off pets, children and the curious from the roof. In general, don’t work on a roof when it is already sweltering.

When you are working on a dark roof, the roof is much hotter than the ambient air, and the last thing you need is someone getting overheated and falling. And in the case of extreme temperatures, the shingles could fail to seal or lie properly, too, if installed during the hottest part of the day.

Use the Right Safety Equipment

Non-slip shoes are a necessity. You also need a fall protection harness. A protective harness is often overlooked for do it yourself roof repair projects, but you would rather go through the hassle of using the harness than having two or more broken bones because you fell off the roof. While a safety harness may not be necessary on a flat roof one story off the ground, it is essential if on a second story or taller roof or any steeply pitched roof. On steeply pitched roofs, you can install temporary toe holds to help you keep your grip. They’ll get nailed to the roof deck and can be removed when you’re done.

Keep Your Ladder Safe

Always check for electrical hazards before handling a ladder, and don’t use a metal ladder near power lines. You can keep a ladder safe and steady by using a gutter guard. The ladder guard lets you lean the ladder legs into their notches and tie it into place, instead of leaning a ladder against the gutters and hoping it doesn’t slip or fall. Don’t use ladders when scaffolding is more appropriate.

Use the Ladder Properly

Only use ladder accessories like ladder jacks and ladder levelers for their intended purpose. Don’t use the top run of the ladder as a step unless it was designed to do that. Don’t use a step ladder as a single ladder, since it is unstable in this position. And never put a ladder on top of a step ladder or other unstable surface to try to gain extra height.

Clean Up Before You Work – And Then as You Work

Before you start working on the roof, clean it. Sweep off dirt and accumulated debris so there is less chance of someone slipping, and you also reduce the risk of someone kneeling on an old nail.

Clean up as you work, too. Tools left out during a thunderstorm could be ruined by the rain. Tools left on the roof could fall off at random times and injure someone down below. Then there’s the risk of theft or just forgetting them when you move on to another job. Debris just left on the roof will eventually rain down and become litter for others, so clean it up as you work.


Whatever you do, only work on your roof when it is safe, and then do so when using the right safety equipment. Use the right ladder for the job, use the ladder safely and don’t use ladders as they were not intended to be used. Clean the roof before you start working, and then clean up as you go to minimize the risk to workers and those down below.

Is Vinyl Fencing a Good Choice?

Vinyl fencing is made of pvc (polyvinyl chloride) and has taken a hard hit due to products of the past. They were known to yellow and become extremely brittle. Advances in the chemical formulation now make it one of the most durable products to use for fencing. Installing pvc fence is faster than most types of materials and has the ability to last for generations.

Will Vinyl Fencing Fade or Yellow?

Vinyl fence material will gradually lose the ability to reflect light as it does for the first few years, but the better products are formulated using UV protection to keep it from yellowing. Sun fade will never be a problem with the vinyl of today.

Is Vinyl Fencing Prone to Damage, Cracking, Peeling, Chipping or Breaking in Hot and Cold Temperatures?

Vinyl is created to be more giving and forgiving in use. It will bend and flex back into place in most instances, whereas metal and wood are rigid and will most likely break, crack or end up with a permanent deformity. Vinyl has a flash point of 900 degrees Fahrenheit, which means the hottest summer days will not melt the product as some fear. Plastic products are a bit more fragile in excessively cold temperatures, but barring a direct hit with a hard object the fencing should be perfectly fine.

How Long Does a Vinyl Fence Last?

A vinyl fence is designed and constructed to last a lifetime with regular wear and tear. It will lose a little of its initial luster after a few years, but the color will still be very vibrant and eye-pleasing. To extend the life it is best to avoid direct impact with hard objects like rocks, metal and hard hits by moving cars, trucks or motorcycles.

Is Vinyl a Strong Fencing Material?

Unlike metal and wood counterparts, vinyl fencing is made to bend slightly with mild impacts and stress. It is formulated to bounce back nicely. It will generally outperform metal and wood fencing.

Is Vinyl Fencing High Maintenance?

There is a little routine cleaning and care that needs done, but vinyl fencing is relatively maintenance free. It is best to not lean heavy objects against the fence for any length of time. Cleaning it is as easy as using soap and water and rinsing it with a hose. The fencing will stay pristine looking for many years to come. It is not subject to mold, insect infestation or rot like wood. It will never rust away like metals.

How Expensive Is Vinyl Fencing Material?

Vinyl fence material is slightly higher than wood, but less expensive than metal. This places the product in the moderate price range, but the years of ultimate performance make it a smart option to consider for your next fence replacement.

Contact a professional fence contractor like www.renovationexperts.com and get a no obligation quote on vinyl fencing. Upgrade to a product that will outlast many others.

What is the Best Timber for Wood Pergolas?


Wood has long been the favored material for pergolas and other outdoor structures. Many types of wood are available and your choice will influence the appearance, maintenance needs, and lifespan of your pergola. The most abundant woods for outdoor use in North America are cedar, pressure treated woods, pine, teak, California redwood and exotic hardwoods.

For many reasons, the outdoor furniture experts here at Forever Redwood believe redwood is the ideal timber for wood pergolas. Redwood has been the wood of choice for decades. Like teak, it is beautiful and durable. But compared to teak, which is in wide circulation today, redwood possesses superior qualities.

The Advantages of Redwood


One feature that makes redwood so useful is its terrific durability. Redwood is highly weather-resistant. It has a natural ability to deter termites and other pests. It also has an unusual ability to retain water longer than other types of wood. Many builders have observed decks made using less enduring types of wood where planks have shrunken, shriveled, bowed and lost their shape- even breaking away from the fastenings. With redwood, moisture remains in the wood- sometimes for years- and planks stay where you want them for much longer.

Unique Grain

Redwood timber has a distinctive long and straight grain that is appealing to discerning, aesthetically-minded homeowners. The vibrant red color of stands out, catching the eye in any yard or garden. To some DIY enthusiasts, it’s the look of redwood, more than any other feature, that makes it the timber of choice for a pergola, deck or just about any outdoor building project.

Easy to Work With

Most carpenters with experience working with redwood report that it is a comparatively easy wood to use. As one of the softer woods, redwood is much less likely to buck your saw or stop power tools. That means you’re much less likely to have an accident when working with redwood. Overall, it is a winner when it comes to building quality pergolas, or anything that will raise the value of your home or property.

Excellent Bungalow Design by Christopher Polly


A bungalow is a place that can give comfortable feels for the owner. This is what trying to express by an Australian architect, Christopher Polly. By the end of 2012, he had just finished a project extending a bungalow which located in Sydney, Australia. This bungalow was built in the second floor and there are some extra spaces at the back and bottom of the building. For the bungalow design, Polly took SDA Structures. While for the installation of pipelines, he entrusted to ACOR Consultants. Finally, in December 2012, this building has been completed established. Continue reading “Excellent Bungalow Design by Christopher Polly”

Home Construction and How to Plan It for The Best Home Ever


To create the best home is not easy, you need to plan your home construction carefully to prevent defective house as the result. without proper planning and the right design, you will expect brittle house from the start and you will regret it in the future. Getting some help from expert is better, especially if you don’t really know about constructing a home too much yet.

With proper new home construction planning, you should be able to progress smoothly and with less problems than before. On top of it, you can make your dream house easier since you already planning it with proper budget spending, and how long it will take for you to finish your new home. Just remember to design it to withstand natural disaster and to prevent your home to get messed up as the result.

Check out some tips and advice from other people about new construction homes, you might be able to find the right design and tips on building your home with the right method. Some people might share their experience on building their own home, and with that info you can help yourself to make your home construction to progress smoothly until it finished.

It can be very difficult searching for professional plumbers in Philadelphia. That is why we have carefully chosen a top quality Bryn Mawr plumber service that helps you recognize which company is most reliable with cheap prices that is nearest to you!

Shipping and Storing Large Items

Shipping and storing large items can be a difficult process for many businesses who are not in possession of containers large enough to fit these items. Businesses that must store/ship large machinery or large building supplies need high cube containers available for these items. When choosing to buy shipping containers, businesses can use the largest of these items for their massive inventory. Machinery and Machinery Parts The business that supplies machinery to contractors must use high cube containers to ship and store the units and parts they are sending. Even with these large containers, the machinery and parts may barely fit.

However, there is no better way to protect an expensive piece of machinery than keeping it in a structurally-stable storage container. Likewise, the parts for the machinery must be kept in large storage containers that can keep the parts safe during transit. These same containers can be used on a job site for spare parts and materials. The containers can be closed up at night, locked for security and re-purposed when the job is done.

Bulky Supplies Lumber and other bulky building supplies often only fit in high cube containers. When shipping the largest pieces of a building or storing them, high cube containers are often the only place for these items. The shipment of the items cannot be completed if the items do not fit in the container. As before, the bulky building items can be stored in a high cube shipping container to ensure their safety when they are not in use. Constructing Storage Facilities High cube containers can be used to construct a large storage facility when the owner does not want to build a traditional structure.

The storage containers can be left in the natural state with the doors opening as normal. However, these high cube containers can be fitted with garage-style doors if the owner prefers. If the owner of a business ships and stores bulky items on a regular basis, they must carefully consider where those items will be placed. Only high cube containers are large enough for the massive machinery and building supplies that are needed for construction projects. The investment in these containers saves businesses money on shipping, and these containers helps to keep large items safe.